An ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 Certified Manufacturer.

  • Call Us Today

    (+971) 6 5360 116

  • Working Hours

    Mon - Sat: 8 am to 6 pm

  • P.O. Box 78774

    Sharjah - UAE

Ask Experts
Packing of CRESTHANE PU 300

CRES®THANE PU 300

Single component polyurethane waterproof coating

Liquid-applied, highly permanent elastic, cold applied, bitumen extended, one component polyurethane membrane used for long lasting waterproofing.

Properties:

  • Single component, ready to use.
  • Water based, eco-friendly.
  • When applied, it forms a seamless membrane without joints.
  • Provides excellent crack bridging properties.
  • Excellent adhesion to porous and non porous substrate.

Uses:

  • Waterproofing of foundation, retaining wall, basements and columns etc.
  • Waterproofing in terrace, balconies, planter boxes etc.
  • Under-tile waterproofing in wet areas such as kitchen, bathrooms etc.
  • Waterproofing and protection of Concrete constructions.

Packing & Colour:

PackingColour
20 kg pail.Black

Related Document(s):

kanz-horizon-download

How to Use:

  • All Surfaces should be sound, clean and free from contaminants loosely adhering particles such as cement, laitance, rust scales etc. should be removed by suitable means. Concrete should preferably be dampen with water. In kitchens & wet areas all the opening should be properly sealed. Concrete should be cured for at least 28 days and should have a compressive strength of at least 25 Mpa. Loose friable material and weak concrete must be completely removed by mechanical means to achieve an open textured surface and all surface defects such as blowholes and voids must be fully exposed. Repairs to the substrate, filling of joints, blowholes/voids and surface leveling must be carried out using the appropriate CRES® products.
  • On sound, high quality concrete surfaces no primer is necessary. Prime very absorbent and brittle concrete or brittle cement screed surface with CRES®THANE PU 300 dilute with 10 to 20 % clean water. For very porous substrate prime with CRES®THANE PU 300, allow the prime coat to cure. Stir well before using for at least 2-3 minutes by using mechanical mixer until the material is homogenous. Apply the CRES®THANE PU 300 onto the surface by roller or brush, until all surface is covered. After 16-24 hours apply another layer of CRES®THANE PU 300. It can be applied by brush, roller or squeegee. When two or more coats are required, it is important that the preceding coat is fully dry before the successive coat is applied. Coat should be brushed at right angle to each other. Do not apply CRES®THANE PU 300 to outside areas in wet weather or when rain is expected. Protect freshly applied product from rain until it’s fully cured.

Related Products:

Previous
Next