An DCL & ISO Certified Chemical Manufacturer.
-
Call Us Today
(+971) 6 5360 116
-
Working Hours
Mon - Sat: 8 am to 6 pm
-
P.O. Box 78774
Sharjah | Abu Dhabi - UAE
CRES®FIB WB
Fibrated bitumen emulsion coating
Single component cold applied, water based asphalt emulsion. It is manufactured from asphalt emulsion, non-asbestos fiber, clays and other additives. It has a brown appearance when wet but will dry to a near black color.
Properties:
- Easy application.
- Excellent adhesion.
- Weathering resistance.
- Single component, Cold & liquid applied.
- Fibrated for extra stability and flexibility.
- No cracking and no flaking at higher temperature.
- Can be applied on vertical and horizontal surface.
Uses:
- It is used for general waterproofing and damp proofing material that adhere to a wide range of surfaces including concrete, bricks, inclined roofing bitumen membrane, metal, wood etc.
- It can be used as the protective coating for built-up roofing systems, below grade and other exposed surfaces, as a damp proofing membrane.
- It is used as protective coating for concrete foundation walls.
Packing & Colour:
| Packing | Colour |
|---|---|
| 200 L drum and 20 L pail. | Brownish Liquid. |
Related Document(s):
How to Use:
- All substrates must be sound, clean, dry and smooth. Repair any damage and crack areas. If the surface is porous and dry, CRESFIB WB is recommended for better penetration and adhesion. Allow to dry completely before application of coating.
- Stir the material before use. Uniformly coat the entire surface using a brush, trowel or squeegee. When multiple coatings are required, allow the first coat to dry and then apply the second coat at right angles to the direction of the first coat.