An DCL & ISO Certified Chemical Manufacturer.
-
Call Us Today
(+971) 6 5360 116
-
Working Hours
Mon - Sat: 8 am to 6 pm
-
P.O. Box 78774
Sharjah | Abu Dhabi - UAE
CRES®RELEASE SB
Solvent based mould release agent
Single component solvent based mould and shutter releasing agent suitable for mould and shutter faces prior to casting to concrete in order to achieve to clean release. After removal of the form work, the resultant concrete has a smooth hard uniform finish, with reduced incidence of blow holes. It can be applied to the formwork by spray in the form of a light uniform mist coating.
Properties:
- It reacts chemically with cement to impart excellent release properties to treated surfaces. Concrete cast against surfaces coated with it exhibit a smooth, hard, uniform finish.
- It has no negative effect and the properties of the concrete, nor will it impair the adhesion of subsequent surface treatments when applied at the recommended coverage rates. Easy release, reducing damages and improve the efficiency.
Uses:
It is formulated to provide quick, clean and easy stripping of molds and formwork prior to casting concrete, it can be applied to the below materials such as metal, plastic, and wood.
Packing & Colour:
| Packing | Colour |
|---|---|
| 200 L drum and 20 L jerry can. | Straw colour liquid |
Related Document(s):
How to Use:
- All mould and shutter surfaces must be cleaned from deposits of rust, concrete, oil, contaminants and other materials. It can be applied to new or old form work.
- It can be applied by brush roller or mould oil sprayer. Apply before the first casting and thereafter re-apply immediately after stripping and cleaning the mould Light weight horticultural spray ers are ideal as CRESRELEASE SB is finely atomized to give a uniform coating. Excessive applications should be avoided.
- Alternatively, application may be made by a fine haired brush, only a very thin coating should be made and any excess removed. If after the first application, It is completely absorbed into new timber or plywood, a further application should be made before filling the mould or formwork.
- Compostition: Low viscosity hydrocarbon carrier, blended with a chemically active release agent.