An DCL & ISO Certified Chemical Manufacturer.
-
Call Us Today
(+971) 6 5360 116
-
Working Hours
Mon - Sat: 8 am to 6 pm
-
P.O. Box 78774
Sharjah | Abu Dhabi - UAE
CRES®SEAL PU
One component non sag polyurethane sealant
One component, gun-grade, Non-sag, moisture-cure polyurethane sealant designed to skin and cure rapidly. This high performance product is designed with outstanding UV resistance and long term durability.
Properties:
- Accomdates 30% joint movement.
- Permanently flexible, excellent weather ability.
- Cures to a tough, durable, elastic consistency excellent cut and tear resistance.
- Paintable, non-sticky after cure.
Uses:
- Sealant is designed to seal construction joints.
- To seal waterproof rivet seams and roof rails.
- To seal perimeter joints around windows and doors.
- Sealing Air conditioning equipment, flashing and gutters.
- Sealing door hinges, skylights and pot holes.
- Sealing corner moldings, fabricated roof-lap seams, bumper assemblies and body-to-cab joints in motor homes.
Packing & Colour:
| Packing | Colour |
|---|---|
| 600ml sausage, 20 sausages per carton. | White, off white Grey and Black. |
Related Document(s):
How to Use:
- Easy to apply with conventional caulking equipment. Ensure that the backer rod is friction fitted properly. Mask the sides of the joint with tape prior to filling for a cleaner finish. Fill the joint completely with a proper width-to-depth ratio and tool to ensure intimate contact of sealant with joint walls. Dry tooling is always preferred, although xylene can be used in limited amounts to slick the spatula if needed following the initial dry tooling.
- Typically adheres to common construction substrates without primers; however, due to the variability of substrate finishes available, where deemed necessary, use primer mockup or field adhesion test can be performed on the actual materials being used on the job to verify the need for a primer.