An DCL & ISO Certified Chemical Manufacturer.

  • Call Us Today

    (+971) 6 5360 116

  • Working Hours

    Mon - Sat: 8 am to 6 pm

  • P.O. Box 78774

    Sharjah | Abu Dhabi - UAE

Ask Experts
CRESFLEX 202

CRES®FLEX 202

Single component elastomeric acrylic weather resistant coating

Single component acrylic based coating for a tough, flexible, elastomeric and durable coating and has a high level of resistance to weathering agents like UV rays, sunlight, frost, rainfall etc. CRESFLEX 202 gives Solar Refelctive Index (SRI) on existing or new roofs.

Properties:

  • Weatherproof coating.
  • Non toxic & easy to mix and apply.
  • Excellent adhesion.
  • Elastomeric, high crack bridging capability.
  • Eco-friendly, water based.
  • Good resistance to chloride & carbon dioxide diffusion.
  • UV and weathering resistant.

Uses:

  • Protective and solar refelctive coating for sloped concrete roofs & metal profile roofs.
  • Protective coating for polyurethane sprayed foam against UV effect.
  • It is designed to apply on wide variety of materials, i.e. concrete, light weight concrete, wood and asbestos cement.
  • Terraces and balconies.
  • Wet areas such as kitchen, bathrooms and residential buildings.

Packing & Colour:

PackingColour
20 kg plastic pail.White / Grey

Related Document(s):

kanz-horizon-download

How to Use:

  • The surface of the concrete shall be sound, clean and uncontaminated. This preparation shall be such as to leave a sound exposed concrete surface free from dust, loose particles and any deleterious matter. Cracks and potholes shall be reapired with the suitable “CRES” range of products.
  • Metal surface: Clean the surface of all rust scales. This can be achieved by wire brushing or grit blasting.
  • Priming: A primer coat is required to seal the pores and stabilize the surface. CRESFLEX 202 with 20% dilution with clean water should be used as a primer coat if required. It will improve the bond strength of the coating. This can be applied by a brush, roller or spray.
  • The primer coat should be allowed to dry completely before the application of CRESFLEX 202. CRESFLEX 202 can be applied by brush, roller or an airless spray. When applying by airless spray then dilute the coating with approximately 5% water to reduce the viscosity of the coating. Apply a minimum of two coats with undiluted material @1.2-1.4 kg/m2 per coat for 0.5mm DFT.

Related Products: