An ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 Certified Manufacturer.

  • Call Us Today

    (+971) 6 5360 116

  • Working Hours

    Mon - Sat: 8 am to 6 pm

  • P.O. Box 78774

    Sharjah - UAE

Ask Experts

CRES®CRETE ESF

Heavy duty epoxy flooring

It is a solvent free non shrink epoxy resin based flooring. This flooring has excellent mechanical and abrasion resistance properties and is resistant to a wide variety of chemicals. This  system is designed to provide a heavy duty topping for industrial floors. The flooring can be applied in thickness from 4mm to 20mm in a single lay.

Properties:

  • Solvent free system
  • Excellent adhesion to substrate.
  • Excellent abrasion resistance.
  • High Mechanical strength.
  • Non-slip, non-skid finish possible.
  • Good resistance to chemicals.

Uses:

  • Workshops, warehouses, garages etc.
  • Chemical plants & factories.
  • Dairies & food processing plants.
  • Heavy engineering industrial floors.
  • Car parks with higher anticipated load.
  • Levelling rough & damaged substrate.

Packing & Colour:

PackingAppearance
16 kg kit.N/A.

Related Document(s):

kanz-horizon-download

How to Use:

  • The substrates must be sound, dry, and free of dust, looseparticles,wax,oils,rust,curingcompounds. New surface shall be atleast 28 days old and the surface moisture content less than 5%.
  • It is essential that the mixing instructions are carefully followed to ensure the correct characteristics of the product are achieved. Failure to do so can result in lower performance or even possible failure of the product. Mechanically mix the entire contents of the resin components together for atleast 1–2 minutes until a uniform colour & consistency is achieved. DO NOT UNDER ANY CIRCUMSTANCES PART MIX MATERIALS. Empty the mixed resin into a suitable empty container with sufficient volume to accommodate the total yield of the material. Add the aggregate component to the mixed resin component and mix using a slow speeddrill and paddle or forced action mixer for anadditional 2 – 3 minutes, until a uniform colour & consistency is achieved. Always add the aggregates to the resin..
  • The epoxy flooring shall be applied immediatelyafter mixing within its working time. Discharge themixed material from the mixer and place on the floor when the primer is still in a tacky condition. Spread and compact the material with a woodentrowel to get a uniform thickness and complete the application with a steel trowel.

Related Products:

Previous
Next