An ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 Certified Manufacturer.
-
Call Us Today
(+971) 6 5360 116
-
Working Hours
Mon - Sat: 8 am to 6 pm
-
P.O. Box 78774
Sharjah - UAE
CRES®COAT RBE 4010
Rubberized bitumen emulsion
Ready to use cold applied bitumen emulsion modified with rubber latex, to provide a tough durable and elastic coating. The cured film is weatherproof and resistant to aggressive ground salts.
Properties:
- Excellent adhesion to most building substrates.
- Single component, non-flammable and easy to apply tough impermeable film with good resistance to rupture during back filling.
- Resist attack from chloride and sulphate ions, excellent resistance to extreme of temperature, avoiding risk of flow or embrittlement.
- Sufficient elasticity to accommodate small movements and hairline cracks.
- Suitable for application into damp and dry surfaces.
- Forms a tough, elastic and seamless coating upon drying.
- Can be applied on vertical and horizontal surface
Uses:
- Tanking, waterproofing concrete, brick foundation, retaining wall, bridge abutments, basements & columns etc.
- Damp proof membrane in sandwich construction.
- Adhesion for bonding wooden flooring, insulation board, expanded polystyrene PVC and cork tiles etc.
- Curing membrane cum protective coating for sub structure.
Packing & Colour:
| Packing | Colour |
|---|---|
| 200 L drum and 20 L pail. | Brown Liquid. |
Related Document(s):
How to Use:
- Surfaces should be sound. Clean and free from contaminants loosely adhering particles such as cement, laitance, rust scales etc. should be removed by suitable means.
- It can be applied by brush, squeegee or spray. When spraying it is advisable to dilute the product with 10% clean water. Hot dry or very porous substrates should be dampened with clean water prior to application of CRESCOAT RBE 4010.
Related Products:
Previous
Next
