An ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 Certified Manufacturer.

  • Call Us Today

    (+971) 6 5360 116

  • Working Hours

    Mon - Sat: 8 am to 6 pm

  • P.O. Box 78774

    Sharjah - UAE

Ask Experts
Packing of CRESBOND AR

CRES®BOND AR

Acrylic based bonding agent and admixture

Single component acrylic copolymer emulsion based product which is used in cementitious mortar and screed as an admixture and as a bonding agent and curing agent for concrete and patch repair.

Properties:

  • Single component, easy to use.
  • Excellent adhesion to concrete, stonework, masonry, etc.
  • Improves bond, compressive and tensile strength of cementitious mixes.
  • Suitable for internal and external application
  • Increases durability and flexibility.
  • Compatible with all types of cements.

Uses:

  • Bonding: For bonding of new to old concrete.
  • As a primer for all cement based repair products.
  • Admixture: As an admixture for cementitious systems. Improves the durability, waterproofing and abrasion resistance properties of mortars.
  • For repairing cement and mortar.
  • Bonding agent for rendering, plaster, screed and concrete
  • Compatible with all types of cements.

Packing & Colour:

PackingColour
200 L drum and 20 L jerry can.Milky white liquid

Related Document(s):

kanz-horizon-download

How to Use:

  • Make sure the surface is dry and not subject to rising or continual dampness. Clean well to remove all unsound and foreign matter i.e. mould oil, dust, laitance, grease, lime wash, distemper, emulsion paint, flaking paint, etc.
  • Surfaces should be saturated with water to avoid possible backwater at the moment of casting. However, ensure that the surface is free of standing water. Prepare a bonding slurry by mixing two parts O.P. Cement to one part of CRESBOND AR. Using a stiff brush, work the bonding slurry well into the damp surface, ensuring that no pinholes are visible. Do not apply bonding slurry at a thickness in excess of 2 mm. If a second coat is necessary, it must be applied at right angles to the first to ensure complete coverage. The mixed bonding slurry should be applied at 1-2 kg/m2.
  • It must be diluted with water according to the required application. The solution must be poured into a cement mixer and then cement and filler can be added. Mix for few minutes till homogeneous mixture free from lumps is achieved.

Related Products:

Previous
Next