An DCL & ISO Certified Chemical Manufacturer.
-
Call Us Today
(+971) 6 5360 116
-
Working Hours
Mon - Sat: 8 am to 6 pm
-
P.O. Box 78774
Sharjah | Abu Dhabi - UAE
CRES®PUTTY EP 100
Solvent free non sag epoxy putty
Two component non sag epoxy resin based repair putty for concrete surfaces. Epoxy putty consists of fillers and non sagging additive which makes it ideal for application on vertical surfaces. It is designed for filling of blow holes, cracks and minor imperfections on concrete surfaces.
Properties:
- Thixotropic, Can be used in vertical and overhead application.
- Easy to apply solvent free 100 % solid content.
- Can be trowelled to a smooth finish.
- Applied directly to concrete surfaces without the need of primer or bonding agent
Uses:
- Concrete surfaces: Filling of blow holes cracks and surface imperfection upto 5 mm.
- As a skim coat/filler on prepared floors prior to application of finish coatings and screeds. As a bonding agent: It bonds to almost all rigid surfaces.
- As concrete repair: Reparing damaged concrete, crack filling on horizontal, vertical and over head surface.
Packing & Colour:
| Packing | Colour |
|---|---|
| 6 kg kit. | Grey. |
Related Document(s):
How to Use:
- Surfaces should be sound, clean and free from contaminants loosely adhering particles such as cement, laitance, rust, scales etc. should be removed by suitable means.
- Application can be carried out by a steel trowel or putty knife or scraper. Press firmly the mixed mortar into the area to be filled to ensure proper adhesion and full contact. The epoxy putty shall be applied at a maximum thickness of 5mm in one layer. Additional layers should be applied after the applied mortar achieves its initial cure.The area repaired with CRES®PUTTY EP 100 can be over coated with any epoxy or polyurethane coating after it achieves its initial cure.
