An ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 Certified Manufacturer.

  • Call Us Today

    (+971) 6 5360 116

  • Working Hours

    Mon - Sat: 8 am to 6 pm

  • P.O. Box 78774

    Sharjah - UAE

Ask Experts
CRESFLOOR SL 1200 Packing.

CRES®FLOOR SL 1200

Solvent free high build smooth surface epoxy flooring

Three component high performance solvent free epoxy flooring product composed of epoxy resin, hardener and selected silica. It is used for thickness from 1 to 2 mm. It has high filling ability when applied to substrate. Once cured,it provides a watertight seamless coating with high abrasion, excellent impact, mechanical and chemical resistance.

Properties:

  • Solvent free.
  • Provides high level of filling in a single application.
  • Excellent chemical resistance.
  • High abrasion resistance.
  • Smooth, impervious seamless floor, glazed and easy to clean.

Uses:

  • Chemical manufacturing plants.
  • Car parks and workshops.
  • Warehouses and industrial floors.
  • Production assembly areas, Pharma plants & laboratories etc.

Packing & Colour:

PackingAppearance
Three packs of 27 kg kit.
Component A: Resin
Component B: Hardener
Component C: Aggregates 		Liquid coating.

Related Document(s):

kanz-horizon-download

How to Use:

  • Substrates: Long term durability and function can only be achieved with good preparation to give a strong adhesive & mechanical bond to the substrate.
  • It is essential that the mixing instructions are carefully followed to ensure the correct characteristics of the product are achieved. Failure to do so can result in lower performance or even possible failure of the product.
  • For preparation of product, Component A should be mixed separately for two minutes with a heavy duty, slow speed drill fitted with a mixing paddle at low number of turns (200-300 RPM) until a homogeneous mix is obtained. Pour the hardener (Component B) into the base mixture and mix for another two minutes. It is always recommended to mix a complete kit at a time. Over mixing must be avoided to minimize air entrainment. Once mixed, the material must be used within its pot life.
  • Pour the mixed material onto the prepared surface and spread using a squeegee or notched trowel. Allow to level naturally then use a spiked roller to release entrapped air and assist in spreading the material further to achieve the required thickness. Allow to cure for minimum 12 hours at 25 °C for light traffic.

Related Products:

Previous
Next