An ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 Certified Manufacturer.
-
Call Us Today
(+971) 6 5360 116
-
Working Hours
Mon - Sat: 8 am to 6 pm
-
P.O. Box 78774
Sharjah - UAE
CRES®FLOOR FC 100
Solvent free high build epoxy floor coating
Two component high performance solvent free epoxy system designed for the protection of concrete. Once cured, the product has excellent abrasion and good chemical resistance. It provides an attractive hard wearing and easily cleanable floor finish.
Properties:
- Solvent free.
- Easy application by brush, roller or squeegee.
- Excellent chemical resistance.
- High abrasion and impact resistance.
- Durable, low maintenance cost.
- Slip resistant finish can be obtained.
Uses:
- Chemical Manufacturing plants.
- Car parks and workshops.
- Warehouses and industrial floors.
- Production assembly areas, workshops, diaries, bottling plants, breweries, pharma plants, kitchens, showrooms etc.
Packing & Colour:
| Packing | Appearance |
|---|---|
| Two packs of 18 L kit. Component A: Resin Component A: Hardener | Liquid coating. |
Related Document(s):
How to Use:
- Concrete substrates: Long term durability and function can only be achieved with good preparation to give a strong adhesive & mechanical bond to the substrate.
- It is essential that the mixing instructions are carefully followed to ensure the correct characteristics of the product are achieved. Failure to do so can result in lower performance or even possible failure of the product. For preparation of product, Component A should be mixed separately for two minutes with a heavy duty, slow speed drill fitted with a mixing paddle at low number of turns (200-300 RPM) until a homogeneous mix is obtained. Pour the hardener (Component B) into the base mixture and mix for another two minutes. It is always recommended to mix a complete kit at a time. Over mixing must be avoided to minimize air entrainment. Once mixed, the material must be used within its pot life
- A minimum two coat application is generally recommended. Apply the first coat of mixed material using brushes or rollers to a theoretical coverage rate of 4-5 m2/L/coat in a continuous uniform coating. If a non-slip finish is required, scatter or completely blind Anti slip aggregate into the wet first coat until the desired anti slip profile is achieved. Allow the first coat to dry and sweep off any excess aggregate prior to the second coat. Apply the second coat of CRESFLOOR FC 100 in the same manner as the first, allowing at least 20-36 hours drying time between coats. Please note the coverage rate will vary if an anti-slip profile has been used. For high risk applications, we recommend glass fibre reinforcement is embedded into the wet first coat, particularly at floor / wall junctions and joints in concrete substrates, to reinforce the coating.
Related Products:
Previous
Next
