An ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 Certified Manufacturer.

  • Call Us Today

    (+971) 6 5360 116

  • Working Hours

    Mon - Sat: 8 am to 6 pm

  • P.O. Box 78774

    Sharjah - UAE

Ask Experts

CRES®FOAM SF-40 / MDI

Two component polyurethane spray foam for combo roof system

It is a formulated polyol suitable for polyurethane spray foam system used for the insulation of roofs, walls, sheds and basements with a density of 40-42 kg/m3. CRESFOAM SF-40 has been pre blended with HCFC-141b and to be used in combination with MDI.

Properties:

  • Roof spraying applications
  • Flooring and wall insulation
  • Storage tank insulation
  • Good bonding to all materials - concrete, metal, and wood
  • Low thermal conductivity.

Uses:

It can be widely used in the production of rigid polyurethane foam insulating materials, also used in PIR foam.

Packing & Colour:

PackingAppearance
Component A: CRES®FOAM SF-40: 220 kg drum.
Component B: CRES®FOAM MDI: 250kg drum. 		Component A: Yellow to brown liquid.
Component B: Brown liquid.

Related Document(s):

kanz-horizon-download

How to Use:

  • Upon casting and complete curing of roof slab, contracting Company’s engineer shall visit the site to inspect the roof and accept the roof for waterproofing and heat insulation works.
  • Prior to commencement of roof waterproofing works, main contractor shall make sure following conditions are met.
  • All joints existing between roof slabs other than expansion joints provided shall be filled with non-shrinkage grout.
  • All electrical conduit and other service entries to slab to be clamped and level to be reduced below the top level of PU FOAM.
  • Rain water outlets shall be in place at specified height as per slope.
  • Vertical parapet wall shall be plastered to the required height.
  • Roof door threshold shall be in place.
  • Upstands to be made prior to apply PU foam.
  • All other works on the roof shall be completed prior to commencement of waterproofing works.
  • Contractor representative will sign the pre checklist for acceptance surface preparation.
  • On completion of cleaning works, other preparatory works shall be undertaken like covering of parapet wall and other utilities fixed on the roof to avoid the risk of over spray.

Related Products:

Previous
Next