An ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 Certified Manufacturer.

  • Call Us Today

    (+971) 6 5360 116

  • Working Hours

    Mon - Sat: 8 am to 6 pm

  • P.O. Box 78774

    Sharjah - UAE

Ask Experts

CRES®PROOF 301

Two component cementitious coating

Polymer modified cementitious coating. It is a 2-component product: A-Powder: ready mixture of cement, sand and additives. B- Mixing liquid based on resins and additives. The product are available in three colours, i.e., light grey, dark grey and white.

Properties:

  • Easy to mix and apply.
  • No added water required.
  • Water based-Safe to use, low odour.
  • Excellent elongation and flexibility.
  • Good adhesion to both porous and non-porous surfaces.
  • Excellent protection to concrete substrates against carbonation and chloride attack.
  • Non toxic-suitable for contact with potable water tanks.

Uses:

  • General roof coating.
  • Terraces and balconies.
  • Foundation protection.
  • Retaining walls and basements.
  • Swimming Pools.
  • Wet areas like kitchen and bathroom.
  • Internal lining for potable water tanks.

Packing & Colour:

PackingColour
Part A: 15 kg bag Part B: 5 kg jerry can.Light Grey / Dark Grey / White

Related Document(s):

kanz-horizon-download

How to Use:

  • The substrate to be treated must be perfectly sound, clean and free from grease, dust and foreign matters. The surface should be pre-saturated with water prior to application. However, any standing water shall be removed prior to application.
  • Apply CRESPROOF 301 with a brush, roller, sweeper or trowel. Tools and equipment should be cleaned with water immediately after use. Under normal circumstances, when the full quantities of both components are mixed together, a slurry consistency will result. The consistency of the mix can be altered by reducing the amount of Part B (liquid) to be used. For trowel application, use only 90% of Part B (approximately 4.5 kg). For roller application, mix water maximum of 1 to 1.5 lit (kg) for 20 kg pack.
  • It is recommended to apply CRESPROOF 301 in two coats to provide a minimum thickness of 2mm. Each coat shall be applied @ 1.8 to 2.0 kg/m2 which will give a DFT of 1 mm.

Related Products:

Previous
Next